0x29 — character_move_pause

Resolves a character, gets CCharacterMove, and calls CCharacterMove::MovePause(int).

proven— handler traced, and exercised by at least one shipped script.

At a glance

Opcode	`0x29` (41)
Handler	`CRadiScript::Command_29`
Signature	`CRadiScript::Command_29(int,SCR_DATA*,unsigned int,unsigned int)`
Translation unit	`r_script_run2.cpp`
Address	— debug build; click for all 3
Handler size	`0xD8` (216 bytes)
Engine name	`character_move_pause`
Family	Characters
Command size	`4 + extra_words * 4` bytes

Handler behaviour

Resolves a character, gets CCharacterMove, and calls CCharacterMove::MovePause(int).

Encoding

The command header is one 32-bit word, as described in §3 Instruction encoding:

 31            24 23            16 15             8 7              0
+----------------+----------------+----------------+----------------+
|  flags         |  argument byte |  extra words   |  0x29          |
+----------------+----------------+----------------+----------------+

Bits 8–15 give the number of 32-bit operand words that follow. Bits 16–23 are handed to the handler as a bitfield; on character commands bit 0 normally says whether a character selector word is present. Bit 31 is the keep-going bit.

Operand fields

3 documented fields. input fields are read from the command's operand words; derived fields are computed from other fields rather than stored separately.

Field	Role	Meaning
`character`	input	The packed 32-bit character selector word. Its low half is the character id and byte 2 is a secondary class/variant input; see `character_number` and `character_variant`.
`pause_mode`	input	Mode selector for `pause`; the handler branches on it.
`yield`	derived	Pause the script here for one game frame; the next command runs on the following update. Lines without it keep running immediately.

Engine calls

Engine functions this handler was observed calling:

CCharacterManager::GetCharacterClass2(int,unsigned int,const CCharacter*,unsigned int)
CCharacterManager::GetCharacterMoveClass(const CCharacter*)
CCharacterMove::MovePause(int)
CRadiScript::GetCharacterID(unsigned int&,unsigned int&,unsigned int*,SCR_DATA*,unsigned int)

Bit masks

Masks the handler applies to its argument byte or operand words:

0x0001 0x0003