0x2E — NOP
Immediate return 0; no handler-side behavior.
traced— handler traced, but no shipped script uses this opcode, so the operand layout rests on the trace alone with no real data to check it against.
At a glance
| Opcode | 0x2E (46) |
|---|---|
| Handler | CRadiScript::Command_2e |
| Signature | CRadiScript::Command_2e(int,SCR_DATA*,unsigned int,unsigned int) |
| Translation unit | r_script_run2.cpp |
| Address | — debug build, the only one that confirms it Not placed in the ENG or JPN maps. Those maps are derived, and neither a byte match nor a porting rule has pinned this handler down there — it is still installed in that build's dispatch table. |
| Handler size | 0x8 (8 bytes) |
| Family | Characters |
| Command size | 4 + extra_words * 4 bytes |
Handler behaviour
Immediate return 0; no handler-side behavior.
Encoding
The command header is one 32-bit word, as described in §3 Instruction encoding:
31 24 23 16 15 8 7 0
+----------------+----------------+----------------+----------------+
| flags | argument byte | extra words | 0x2E |
+----------------+----------------+----------------+----------------+Bits 8–15 give the number of 32-bit operand words that follow. Bits 16–23 are handed to the handler as a bitfield; on character commands bit 0 normally says whether a character selector word is present. Bit 31 is the keep-going bit.