0x80 — VIB_LOAD

Reads one halfword id and calls CRadiDataCenter::LoadVibrationData.

traced— handler traced, but no shipped script uses this opcode, so the operand layout rests on the trace alone with no real data to check it against.

At a glance

Opcode	`0x80` (128)
Handler	`CRadiScript::Command_80`
Signature	`CRadiScript::Command_80(int,SCR_DATA*,unsigned int,unsigned int)`
Translation unit	`r_script_run8.cpp`
Address	— debug build; click for all 3
Handler size	`0x2C` (44 bytes)
Family	Vibration, dialogue and text
Command size	`4 + extra_words * 4` bytes

Handler behaviour

Reads one halfword id and calls CRadiDataCenter::LoadVibrationData.

Encoding

The command header is one 32-bit word, as described in §3 Instruction encoding:

 31            24 23            16 15             8 7              0
+----------------+----------------+----------------+----------------+
|  flags         |  argument byte |  extra words   |  0x80          |
+----------------+----------------+----------------+----------------+

Bits 8–15 give the number of 32-bit operand words that follow. Bits 16–23 are handed to the handler as a bitfield; on character commands bit 0 normally says whether a character selector word is present. Bit 31 is the keep-going bit.

Engine calls

Engine functions this handler was observed calling:

CRadiDataCenter::LoadVibrationData