0x2C — CHAR_PERSIST
Resolves a character and calls CSsfHandler2::SetPersistenceAll(bool) or CCharacter::SetPersistenceWithChild(bool, name); the boolean comes from arg bit 7.
traced— handler traced, but no shipped script uses this opcode, so the operand layout rests on the trace alone with no real data to check it against.
At a glance
| Opcode | 0x2C (44) |
|---|---|
| Handler | CRadiScript::Command_2c |
| Signature | CRadiScript::Command_2c(int,SCR_DATA*,unsigned int,unsigned int) |
| Translation unit | r_script_run2.cpp |
| Address | — debug build; click for all 3 |
| Handler size | 0x164 (356 bytes) |
| Family | Characters |
| Command size | 4 + extra_words * 4 bytes |
Handler behaviour
Resolves a character and calls CSsfHandler2::SetPersistenceAll(bool) or CCharacter::SetPersistenceWithChild(bool, name); the boolean comes from arg bit 7.
Encoding
The command header is one 32-bit word, as described in §3 Instruction encoding:
31 24 23 16 15 8 7 0
+----------------+----------------+----------------+----------------+
| flags | argument byte | extra words | 0x2C |
+----------------+----------------+----------------+----------------+Bits 8–15 give the number of 32-bit operand words that follow. Bits 16–23 are handed to the handler as a bitfield; on character commands bit 0 normally says whether a character selector word is present. Bit 31 is the keep-going bit.
Engine calls
Engine functions this handler was observed calling:
CCharacter::SetPersistenceWithChildCSsfHandler2::SetPersistenceAll